A STUDY ON PARAMETRIC DESIGN OF LINE TENDON BASED PROSTHETIC FINGER USING PROGRAMMING TECHNIQUES

Authors

  • Florin - Felix Raduica University POLITEHNICA of Bucharest
  • Ionel SIMION University POLITEHNICA of Bucharest
  • Elena Ionita University POLITEHNICA of Bucharest

Keywords:

prosthetic finger, line tendon design, custom prosthetic,, parametric design, upper limb prosthetic

Abstract

In this paper we discuss the process of geometric modelling of a prosthetic finger using programming techniques. Along the design process OpenSCAD is used to model a prosthetic, one degree of freedom finger. As this is a prosthetic device, the ease of customization is taken into consideration. The type of prosthetic considered is a tendon design with flexible and rigid lines. First, we discuss the medical considerations that are needed to develop the model. Second, we discuss the assembly and function of the generated shape. The result is a downloadable geometric model of the finger assembly and the methodology used to generate the design.

Downloads

Download data is not yet available.

References

Nanayakkara, V., Cotugno, G., Vitzilaios, N., Venetsanos, D., Nanayakkara, T., Sahinkaya, M. N. (2017). The Role of Morphology of the Thumb in Anthropomorphic Grasping: A Review. Frontiers in Mechanical Engineering, Vol. 3, No. 1, (June 2017) pp 1-21, Electronic ISSN: 2297-3079.

Rahman, A., Al-Jumaily, A. (2013). Design and Development of a Bilateral Therapeutic Hand Device for Stroke Rehabilitation. International Journal of Advanced Robotic Systems, Vol. 10, No. 405, (July 2013) pp 1-12, Online ISSN: 1729-8814.

Kashef, S. R., Amini, S., Akbarzadeh, A., (2020) Robotic hand: A review on linkage-driven finger mechanisms of prosthetic hands and evaluation of the performance criteria. Mechanism and Machine Theory, Vol. 145, No. 103677 (March 2020) pp 1-17, ISSN: 0094-114X.

Jang, G., Lee, C., Lee, H., Choi, Y., (2013) Robotic index finger prosthesis using stackable double 4-BAR mechanisms. Mechatronics, Vol. 23, Np. 3, (April 2013) pp 318-325, ISSN 0957-4158.

Brookins N., (2016) Knick's Prosthetic Finger v3.5.5 available at: https://www.thingiverse.com/ Accessed: 2022-02-22.

Li, X., Huang, Q., Chen, X., Yu1, Z., Zhu, J., Han, J. (2017). A novel under-actuated bionic hand and its grasping stability analysis. Advances in Mechanical Engineering, Vol. 9, No. 2, (March 2017) pp 1–13, ISSN 1687-8132.

Yoon, D., Choi, Y. (2017). Underactuated Finger Mechanism Using Contractible Slider-Cranks and Stackable Four-Bar Linkages. IEEE/ASME Transactions on Mechatronics, Vol. 22, No. 5, (October 2017) pp 2046 - 2057, Doi: 10.1109/TMECH.2017.2723718.

Downloads

Published

2021-12-10

Issue

Section

Research Papers

Most read articles by the same author(s)

1 2 > >>