CONSTRUCTIONAL-FUNCTIONAL ANALYSIS AND GRAPHIC DESIGN OF ELECTRO-HYDRAULIC VALVE DISTRIBUTOR
Keywords:
hydrostatic actuator, distributor, valve, pressure, CATIA, CAD, CAE, CAMAbstract
Among the machines which distribute fluid discharge in hydrostatic installations, valve distributors are the most important and differ in terms of a series of criteria related to the number of grooves, the distribution sketch, the nature of the switchboard fixed part (the valve body), a mobile part (valve) and actuator elements. The operation of this type of distributors is based on the translation and shut down of the valve in the body in certain positions. These positions are fixed and the correspondence with certain paths from the body is specific for each type of distributor. This correspondence determines the transfer of the fluid according to the distribution sketch. The work presents the construction environment of a basic distributor component CAM simulation with the help of phases by cutting the valve.
Downloads
References
Tita, I. (2009).Hydraulic and pneumatic actuators,
Pim publishing, Iasi.
Axinti, G., Axinti, A.S.
pneumatic actuatorsTehnica
Chisinau.
Scheaua, F., Axinti, A.S., Axinti, G.
(2012).Mathematical model analysis on hydraulic
energy dissipation machines
pp. 38-42.
Ciocan, O.D. (2008).Hydraulic and pneumatic
actuators, Tehnica-Info publishing, Chi
Iacob, D., Mironeasa, C.
deformation,MatrixRom publishing, Bucharest.
Stan, F., Baroiu, N., Ciocan, O.D.
Technological hydrostatics
and Pedagogical Publishing,
-30-3600-5.
Chirica, I., Beznea, E.F.
anisotropic materials, Fund. Univ. publishing,
Authors:
Assist. Prof., PhD. Nicusor BAROIU
Manufacturing Engineering, ”Dun
of Galati, România, E-mail:
tel.0040721771000.
Assoc. Prof., PhD. Elena Felicia BEZNEA
Engineering Department, ”Duna
Galati, România, E-mail:
tel.0040743605440.
Eng. George BASALIC, Department of Manufacturing
Engineering, ”Dunarea de Jos”
România, E-mail: georgebasalic3@gmail.com
tel.0040753683369.
Table 1
Total Deformation
mm
7437x10-2 mm
inversions without
PN-IIHydraulic
(2008).Hydraulic and
Tehnica-Info publishing,
cheaua, machines, Hidraulica, Vol. 1-2,
Chisinau.
(2008).Electrohydraulic
(2014).
– Applications, Didactical
nd Bucharest, ISBN 978-
, F.(2004).Elasticity of
Galati.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Journal of Industrial Design and Engineering Graphics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
