USING BENCHMARKING TO REDUCE THE FABRICATION COST – A TECHNOLOGICAL ANALYSIS FOR A PART

Authors

  • Catalina Enache Ph.D. Eng. University Politehnica of Bucharest
  • Florina Chischop Ph.D. Eng. University Politehnica of Bucharest
  • Narcisa Valter Ph.D. Eng. University Politehnica of Bucharest
  • Mioara Duca Ph.D. Eng. University Politehnica of Bucharest https://orcid.org/0000-0001-9171-4639

Keywords:

cost production, benchmarking, assembly cost, product comparison, part analysis

Abstract

Benchmarking is an approach that involves confronting your organization's own practices with those of other organizations. The benchmarking term involves the measurement that can be obtained by comparing internal and external practices and the result of significant differences can be analyzed and taken into account. This type of approach can lead to higher chances of success because it requires a good understanding of the quality of the products in the competing groups and are being analyzed the competitor’s strategies for development, production, supply and financial. In this article we will analyze the technological flow of obtaining a part, which we will call "plastic niche reinforcement", for which the realization costs will be identified. The objective is to see if the cost of achieving this part falls within the proposed target and if not what decisions can be taken from a constructive point of view to reduce costs.

Downloads

Download data is not yet available.

Author Biographies

Catalina Enache Ph.D. Eng., University Politehnica of Bucharest

Lecturer Department of Engineering Graphics and Industrial Design

Florina Chischop Ph.D. Eng., University Politehnica of Bucharest

Lecturer Department of Machines and Manufacturing Systems

Narcisa Valter Ph.D. Eng., University Politehnica of Bucharest

Associate Professor Department of Engineering Graphics and Industrial Design

Mioara Duca Ph.D. Eng., University Politehnica of Bucharest

Associate Professor Department of Engineering Graphics and Industrial Design

References

Adithan M., (2007). Process Planning and Cost Estimation, New Age International (P) Limited Publisher, ISBN 978-81-224-2655-7, New Delhi.

Boothroyd G., Dewhurst P., Knigh, W., (2011). Product Design for Manufacturing and Assembly, CRC Press - Taylor and Francis group, ISBN 978-1-4200-8928-8, New York.

Martin P., Dantan J.Y., Siadat A., Houin X., Danie Q., (2007). Cost Estimation and Conceptual Process Planning, available at {https://www.researchgate.net/ publication/226300115_Cost_Estimation_and_Conceptual_Process_Planning} Accessed: 2018-12-23.

Enache I.C., Simion I., Avramescu A.M., Chiscop F., Chiscop M.A., (2014), Using 6 SIGMA in system capability diagnosis to increase productivity, U.P.B. Sci. Bull., Series D, Vol. 76, Iss. 2, ISSN 1454-2358

Joo S.J., Nixon D., Stoeberl P.A., (2011). Benchmarking with data envelopement analysis: a return on asset perspective. Banchmarking: An International Journal.

Per V. F., Hollensen S., The process of benchmarking, benchlearning and benchaction, The TQM Magazine, Vol. 13,No. 1, 2001, pp 25-33.

Ifeoluwa A., Yinshang T., (2010), The Adoption of Benchmarking Principles for Project Management Performance Improvement, International Journal of Managing Public Sector Information and Communication Technologies (IJMPICT) Vol. 1, No. 2, available at

{https://pdfs.semanticscholar.org/576c/27e6fe346089749f0296f5e5c323c87040c7.pdf}, Accessed: 2018-11-17.

{https://www.emag.ro/aparate-frigorifice}, Accessed: 2018-11-17.

Downloads

Published

2019-05-20

Issue

Section

Industrial Design and Graphic Design

Most read articles by the same author(s)