GRAPHICAL RECONSTRUCTION AND FEM ANALYSIS METHOD FOR SMALL DIMENSIONAL FUNCTIONAL PARTS
Keywords:
FEM, ANSYS, small dimension bearings, forces, deformation, scanningAbstract
The paper describes in which way an efficient and conclusive analysis procedure could be successfully applied for parts with functional role for small dimensional bearings. The main issue was to establish to what extent, applying the procedure for small functional parts scanning, could be used without measuring errors caused by deformation in case of contact principle. Considering the contact principle scanning may be due to the fact that metallic surfaces (in case of bearings) invoke high brightness in case on non contact scanning method, using LASER beam principle. The proposed solution proved to be reliable for such of small dimension components with functional role, to find which scanning principle would be more appropriate in terms of dimensional inspection.
Downloads
References
Braun, B., Olteanu, C. (2008) - The modeling of the
small dimension probes deformations submitted to the
dimensional control with contact principle, 12th
International Research /Expert Conference TMT,
Istambul, Turcia, ISBN: 978-9958-617-38-9.
Cristea, L., Repanovici, A.; Olteanu, C., Curtu, I.
(2004) - Dimensional inspection Microsystems for
miniature bearings, Revista Mecatronica nr. 3/2004,
ISSN 1583-7653.
Cristea, L. (2006) - Considerations regarding the
improvement of throust bearings automatic
dimensional inspection, Acta Technica, Cluj-Napoca,
Romania, ISSN: 1221-5872.
Olteanu, F., Zamfira, S., Cristea, L.(2004) – Studies
on a device designed to measure the moment of
friction at small – sized dimension bearings, The 7th
International Conference on Mechatronics and
Precision Engineering, COMEFIM 7, Bucharest, ,
ISBN 973-86886-1-2.
Saeed, M. (2003) – Finite Element Analysis. Theory
and application with ANSYS, 3rd Edition, Pearson
Prentice Hall, Upper Saddle River, New Jersey, USA,
ISBN-13: 978-0-13-189080-0.
Enescu, I. (2006) - Numerical methods for
determination the elastic tensions aplications on
rolling bearings, International Workshop ²Advanced
Researches in Computational Mechanics and Virtual
Engineering”, COMAT, Brasov, Romania, ISBN
-635-823-2.
Rulmenti România (2008) – Caracteristicile tehnice
ale diferitelor tipuri de rulmenti, site: www.rulmentiromania.
ro - accessed in November 2008.
SKF - Interactive Engineering Catalogue (2008)
Rolling bearings, site www.skf.com, accessed in
November 2008.
Olteanu C. (1985) – Mijloace mecanice si
hidropneumatice de masurare - curs, Reprografia
Universitatii “TRANSILVANIA” Brasov.
Cristea, L., Baritz, M., Rosca, I. (2006) - Modular
reorganization of the automatic system for the microbearings
dimensional inspection, International
Workshop ²Advanced Researches in Computational
Mechanics and Virtual Engineering”, COMAT, 18–
October, Brasov, Romania, ISBN 973-635-823-2.
Baritz, M. (2010) - Structural analysis by image
processing of the multilayer ophthalmic
polycarbonate lenses behavior during mechanical
factors aggression, Metallurgic International Journal,
vol. XV no.7.
Downloads
Published
Issue
Section
License
Copyright (c) 2021 Journal of Industrial Design and Engineering Graphics
This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
