COMPUTER PROGRAM WHICH PROVIDES AUTOMATIC DETERMINATION OF SOME CHARACTERISTIC NECESSARY FOR CORRECT DIMENSIONING AND PRINTING OF THE TECHNICAL DRAWING FOR CONSTRUCTION

  • Andrei SLONOVSCHI "Gheorghe Asachi" Technical University of Iasi
  • Liviu PRUNA Technical University of Iasi
Keywords: technical drawing, layouts, scales, format, dimensioning, CAD

Abstract

In the steps preceding the dimensioning and printing of a technical drawing for construction, a series of settings must be made which, if not done correctly, make that the printed drawing and the elements represented in that drawing not comply with the rules of the technical drawing for constructions and the representations made are not correctly understood. Bearing in mind these elements, the authors have developed an original computing program that works on the AutoCAD software interface, which helps users make the necessary settings so that the sheets will finally respect the technical drawing rules regarding the correct use of the print format, of choosing of the title block, of the scale of representation, and the optimal view of delimiters and quota values.

Author Biographies

Andrei SLONOVSCHI, "Gheorghe Asachi" Technical University of Iasi

"Gheorghe Asachi" Technical University of Iasi, Faculty of Civil Engineering and Building Services, Department of Engineering Graphics

Liviu PRUNA, Technical University of Iasi

Director of Department, Technical University of Iasi, Faculty of Civil Engineering and Building Services, Department of Engineering Graphics

References

1 POPA, C. et al., (1996). Technical drawing (Desen tehnic), Ed. “Gh. Asachi”, ISBN 973-9178-36-7, Iasi.
2 ANGHEL, A., PRUNA, L. (2006). Technical drawing with AutoCAD (Desen tehnic cu AutoCAD), Ed. Tehnopress, ISBN 973-702-149-5, Iasi.
3 SLONOVSCHI, A., PRUNA, L., ANTONESCU, I., (2010). Technical drawing for construction (Desen tehnic pentru constructii), Ed. PIM, ISBN 978-606-13-0021-1, Iasi.
4 PRUNA, L., SLONOVSCHI, A, (2014). Infographics (Infografica), Ed. PIM, ISBN 978-606-13-1883-4, Iasi.
Published
2019-05-19
How to Cite
SLONOVSCHI, A., & PRUNA, L. (2019). COMPUTER PROGRAM WHICH PROVIDES AUTOMATIC DETERMINATION OF SOME CHARACTERISTIC NECESSARY FOR CORRECT DIMENSIONING AND PRINTING OF THE TECHNICAL DRAWING FOR CONSTRUCTION. Journal of Industrial Design and Engineering Graphics, 14(1), 175-178. Retrieved from http://sorging.ro/jideg/index.php/jid/article/view/453
Section
Articles