METHOD TO DEVELOP THE DOUBLE-CURVED SURFACE OF THE ROOF

SECTION 2: APPLIED GEOMETRY AND GRAPHICS

  • JURCO Ancuta Nadia Technical University of Cluj-Napoca, Dept. of Automotive Engineering and Transports
  • BODEA Sanda Mariana Technical University of Cluj-Napoca, Dept. of Automotive Engineering and Transports
  • CRISAN Horea George Technical University of Cluj-Napoca, Dept. of Automotive Engineering and Transports
  • SCURTU Liviu-Iacob Technical University of Cluj-Napoca, Dept. of Automotive Engineering and Transports

Abstract

This work present two methods for determining the development of double-curved surface. The aims of this paper is to show a comparative study between methods for determination of the sheet metal requirements for complex roof cover shape. In first part of the paper are presented the basic sketch and information about the roof shape and some consecrated buildings, which have a complex roof shape. The second part of the paper shows two methods for determining the developed of the spherical roof. The graphical method is the first method used for developing of the spherical shape. In this method it used the poly-cylindrical method to develop the double-curved surface. The second method is accomplishing by using the dedicated CAD software method.

Published
2017-05-26
How to Cite
ANCUTA NADIA, JURCO et al. METHOD TO DEVELOP THE DOUBLE-CURVED SURFACE OF THE ROOF. JIDEG, [S.l.], n. 12, p. 55-58, may 2017. ISSN 2344-4681. Available at: <http://sorging.ro/jideg/index.php/jid/article/view/322>. Date accessed: 22 oct. 2017.
Section
Articles

Most read articles by the same author(s)